Home Innovative Products Spitwater hot water blasters – solution for cleaning problems

Spitwater hot water blasters – solution for cleaning problems

by editor

Cleaning earthmoving equipment after a tough day on the job is a problem. Heavy dirt and often clay, as well as stubborn oil and grease are difficult to remove. This is where Spitwater, heavy-duty, industrial hot water high pressure cleaners really come into their own.

Designed and built in the Albury manufacturing plant, Spitwater hot and cold water pressure cleaners offer solutions for big, difficult cleaning jobs. Range of machines available can cater for any size cleaning job, big or small: from a single truck skid-steer loader owner/operator to a large company with multiple trucks and excavators.

The heart of all Spitwater machines is the brass head pump with ceramic pistons – ideal for our water conditions. Nothing that touches water will corrode! In case of electric machines, the pump is direct-coupled to an electric, single phase, 240 V or three-phase 415 V motor. One of the largest and most popular hot/cold machines, Model SW2021, 21 L/min, 3,000 psi blaster requires a 20 Amp power outlet, making this a serious cleaning machine! Petrol and Diesel engine powered fully portable models are also available. They are designed for large operations where it is more convenient to take the cleaner to the large excavators for easier cleaning. All machines are manufactured in a locally made zinc-annealed and powder-coated chassis, some with the red, Spitwater trademark powder-coated cover and some with the stainless steel cover.

All Spitwater hot/cold machines are fitted with a large water-cooling tank. This tank acts like a radiator in a car and is designed to allow full, 100% water by-pass in triggerclosed mode. This is real protection from pump over-heating. Competitive models offer a feed tank but by-pass water back, directly, to the pump head. The Spitwater cooling tank is a genuine by-pass tank with water being drawn from and returned to it when trigger is closed and machine is operating.

To heat pressurised water, the machine is fitted with, ½ inch diameter, genuine, seamless, mild steel or optional stainless steel heating coil, made at the Spitwater manufacturing plant. The coil is fitted to the machine in a horizontal position, allowing for cleaner burning, less sooting and longer coil life.

Using chemicals, such as truck wash or degreaser is simple – all machines are fitted with an adjustable chemical dispenser venturi and a chemical container. Machine controls are very simple: machine on/off switch, burner switch, temperature regulating thermostat and detergent metering control are all located on the machine control panel. All machines are supplied standard with a 10 metre, heavy-duty, 3/8 inch diameter, high pressure hose, high quality, heavy duty guns with back part lance and a dual front lance with a high and low pressure valve and fixed nozzles.

Optional accessories available for these machines include longer hose lengths at 15, 20, 30 or 40 m; hose reel that mounts conveniently on the machine for easier hose storage; turbo lance which will increase washing effect of the machine and a foam gun for easier and more efficient detergent application.

Spitwater hot/cold models are absolutely ideal for many cleaning applications including earthmoving equipment, truck fleet owners, large workshops and on-farm use. They are built tough for tough Australian working conditions and will remove heavy dirt and grease with ease.

For more information please contact:
Spitwater
Phone: 1800 774 892
e-mail: info@spitwater.com.au
web: www.spitwater.com.au

Related Articles