TAKEUCHI® TL12V2 Speeds Site Preparation

By
Updated: May 17, 2017
Takeuchi

Delivering impressively greater operating capacity over the current TL12 radial lift model, this machine has been virtually redesigned from the ground up.

Cut and fill for residential construction sites often present some unexpected challenges. Dealing with hard tasks such as removing embedded rock fragments, pulling out old concrete or just plain stubborn hard-packed clay can add unnecessary time to a routine task.

In these highly competitive days, you don’t necessarily want to have additional equipment on site to deal with some of these challenges, so having a powerful machine that can deal with the tougher sites made perfect sense for Sydney’s Borg Civil.

Already having a fleet of Takeuchi loaders, the company decided to try the new Takeuchi TL12v2 vertical lift track loader, which is an entirely new machine with additional power and a very handy high bucket lift capability. The addition of a rear ripper bar monitored by the rear camera completed the package purchased a few months ago.

A residential construction site in Southwest Sydney showed that this one machine could easily and very quickly complete a typical cut and fill operation to prepare for a concrete slab.

Borg Civil’s operations manager Jerry Zoric says: “We have had the new Takeuchi loader for just a couple of months. We have four Takeuchi radial lift loaders and thought it was worth trying this new TL 12 V2 lift machine to see how it performed. It is a standard factory fitted machine with the addition of the ripper bars we need for situations such as we are experiencing today.

“We were impressed with the construction specification – reverse cameras and the excellent appointments in the cabin. It’s a great machine and has more than enough power needed for this type of application.

We are particularly impressed with the height of the vertical lift which enables us to pile spoil quite high within a constrained footprint which makes it easy for loading the truck.

Truck loading is also very fast as the higher lift lenses get the bucket right over the edge of the truck to quickly load.

“While the cabin is just 77 millimetres wider than the standard TL 12 model it feels a lot bigger and there has obviously been a lot of thought into placement of controls and the ease in which all functions can be selected and manipulated. From an operator’s viewpoint, it’s considerably more comfortable.

“Placement of the lifting booms has been well-designed to optimise operator visibility, which is a real bonus when you’re working the bucket to cut to tight mark out lines.”

 

Takeuchi

Our machines are used for contract work so they are used constantly and need to be super reliable to help us meet our tight timelines.

Weighing in at just under six tonnes, it is claimed to be the largest and most powerful machine in its class. Delivering up to 45 per cent greater operating capacity over the current TL12 radial lift model, this machine has been virtually redesigned from the ground up.

Powering the loader and its systems is a Kubota 3.8 litre diesel engine that produces 81.8kW, and it is compliant with US EPA Final Tier 4 /EU Stage IV emissions.

“There’s an electrical harness that runs down the loader’s frame that plugs into the hand control. This means you can operate attachments that require electrical functions such as a tilting dozer blade, laser blade or a profiler.”

Because the engine is electronically controlled, the operator is able to select engine functions through the dash panel.

This includes adjustment of horsepower or selection of economy mode for fuel economy when undertaking light duty work.

Takeuchi

More information on the Takeuchi excavator range is available at www.semcogroup.com.au or call 1800 685 525.