Equipment and Machinery

24 tonne JCB 467 ZX Wheel Loader

There are many reasons to choose the top-of-the-range 24-tonne JCB 467 ZX loading shovel. It’s productive, efficient, easy to maintain and extremely durable.

For ultimate reliability JCB constructed their wheel loaders using only the very best componentry, including a Cummins Engine, ZF driveline, Bosch Rexroth pumps and Parker Valve block.

The whole of the 467 ZX front loader went through an extensive development program to ensure its durability, including 1.2 million test cycles.

Computer-aided finite element structural analysis to make these wheel loaders last longer – the front-end loaders are used in every corner of the globe – JCB tested the 467 ZX to ensure optimum operation in climates ranging from -20°C to 50°C.

The 467 ZX front loader has a large diameter loader and articulation pins; bushes have secondary seals, which block dirt. Operating 467 ZX front-end loaders is ergonomic. Forward/reverse direction control is a fingertip away, and electro-hydraulic servo controls make loader end handling easy. Return-to-dig, arm height limitation and float functions are always at hand. Disabling these aids is easy too.

This wheel loader’s ZX geometry means that shovel corners are highly visible for excellent manoeuvrability. In fact, visibility is excellent all-round on this front loader, with a threepiece laminated front screen, heated exterior mirrors and a sloping rear bonnet design.

The spacious 3m3 cab on the 467 ZX front-end loader is fitted with a full-colour LCD dash display with analogue dials. The 467 ZX’s cab is isolator mounted for quietness and it’s positively pressurised to keep out dust. JCB’s smooth ride suspension system reduces shock loadings and spillages.

The JCB 467 ZX front loader’s 216kW Cummins engine is mated to a 4-speed ZF fully automatic powershift transmission and standard-fit limited slip differentials for stepless gear changes and smooth operation.

For the ultimate in precise, efficient control, the JCB 467 ZX front loader’s innovative variable displacement pumps feed a load-sensing valve block, only consuming power on demand. They can provide 395 l/min hydraulic flow for maximum multifunctioning performance.

Clever electronic management can control progressive clutch cut-off on the 467 ZX front loader. This equates to efficient, productive loader control. The feature automatically diverts maximum power to the loader hydraulics for optimal truck/hopper loading duties.

Unloaded spool valves lower the 467 ZX’s loader arms lower under gravitational – not hydraulic – force. Meanwhile, wheel speed braking means brakes rotate at wheel speed for heat and drag reduction, as well as improved fuel economy.

The 467 ZX loading shovel’s axles use planetary drive with cylindrical roller bearings for minimal power and heat loss. Meanwhile, wheel speed braking and a low drag coefficient provide maximum power with low fuel use.

467 ZX front loaders have class-leading service and maintenance access, and long 500-hour service intervals. A side bay offers easy access to pressure test points, transmission filters, emergency steer pump, batteries and isolator.

Greasing is convenient from ground level and wide-opening gullwing doors provide easy access to this wheel loader’s engine bay and cooling pack areas.

The 467 ZX front-end loader has a variable speed hydraulic cooling fan that automatically reacts to ambient temperatures and adjusts the fan speed for maximum economy. A single-faced wide core radiator helps to maintain the optimum operating temperature.

JCB’s Electronic Management System controls tractive effort via the front loader’s transmission to reduce service brake wear and fuel consumption.

Auto-idle technology automatically reduces the engine speed of the JCB 467 ZX wheel loader when not in use, which helps reduce fuel consumption and prolong engine life.

For more information call 1300 522 232 or visit

Send this to a friend