Impressive performance – Leica iCON 2D

By
Updated: July 8, 2018

Will Langley from Lismore has recently purchased a SharpGrade 2.2m unit with the Leica iCON 2D machine control system on-board.

Requiring a solution for grading and levelling pads, spreading aggregates and sand to any desired grade along with general grade work, Will chose the SharpGrade/Leica iCON 2D system with dual MLS720 Laser Receivers.

Will was impressed with the strength of the machine and how well it was built.

“The SharpGrade is easy and quick to set up and the performance is very impressive. I can cut a pass with millimetre accuracy  as quick as my machine will allow me every time,” said Will.

“The QuadRod™ linkage was a deciding factor in choosing the SharpGrade over other machines on the market. The service and support from C.R Kennedy that I received is also hard to come by. The follow-up site visit to ensure I was completely satisfied and happy with installation and operation of the SharpGrade was much appreciated.”

Will also had the opportunity to see the Co-Pilot function in the Leica iCON system installed and tested on his machine. It achieved the same smooth, fast passes but this time without the use of the Leica Rugby 880 dual grade laser. CoPilot enables the Leica system to reference the leveller’s blade position to maintain a high and cross slope automatically without the use of laser, or any 3D (GPS or Total station) reference. All the operator must do is drive.

The SharpGrade is the most accurate, precise and well-built leveller on the market today.

Contact C.R Kennedy today on 1300 886 982 to find out how a SharpGrade Leveller can enhance your business.